![](/static/253f0d9b/assets/icons/icon-96x96.png)
![](https://lemmy.world/pictrs/image/94b2b808-7c9c-4de0-a35b-966d14ae40fd.png)
All of the Amcrest “management” I do is within blue iris. I have a ptz IP4M-1041B but do not do any ptz stuff via HA. I use blue iris to send stream/alerts to HA via MQTT. This allows me to do notifications on motion. I would assume if you have location presets setup in BI you could call them from HA but that’s a guess.
I messed around with presets (camera location) in blue iris a bit bit didn’t have a real use case for it so I am not sure how robust it is.
I block internet access to all Amcrest cameras directly but can still access their local IP. I have access to my cameras again via blue iris which runs on a dedicated windows machine.
I had a humidity switch in ours a while ago (not smart) and it would turn on too much even if a shower wasn’t running but our windows were open. And, enough humidity was in the air. So that didn’t work out great.
It was a self contained deal not a smart switch though