cross-posted from: https://feddit.nl/post/19798927
Sure, the whole world is on fire right now, but there are also little things to be upset about. ☝😉
You must log in or register to comment.
There was a time when blue LEDs were the white whale of electronics, always out of reach and everyone wanted to figure out how to make them work. When someone finally did it, it was considered a massive breakthrough, and rightly so. Now they have somehow become the default cheapo LED, moreso than red or green. Could it be an industry-wide ‘fuck you’ to physics? “You tried to keep us from making blue LEDs, hah! Now look at us!!!”
At one point, blue LEDs were super expensive because of their difficult production.
So any product that has a blue LED was considered premium. I guess they were also considered futuristic and high-tech.
Somehow, this is still in the mind of some manufacturers.
All I want is a barely-visible-in-soft-daylight diffused/frosted red or amber LED.
But no, it’s always some 5w lensed blue LED at somehow produces a tighter beam of horrendous blue light that’s brighter than most flashlights.Reminds me on a German proverb “to add your mustard to it”, which apparently came from a time at which mustard was rare and exquisite. So they added it to any kind of food just to “up it’s prestige”.
What a great origin. I Googled it, and it now means “to add your opinion”.
- Seinen Senf dazugeben
Literal translation: To add your mustard to it.
Actual meaning: To give your opinion on something./To give your two cents.
Where there are sausages, there also must be mustard. If you want to ask someone for their opinion and sound like a fluent speaker when doing it, you better invite them to add their mustard.
https://www.mondly.com/blog/german-idioms/
In the process, I found some other great German proverbs with hilarious literal translations.
Literal translation: To talk around the hot porridge.
Literal translation: To ask for an extra sausage.
Literal translation: I believe I spider. (Edit: I believe I spin, see comment).
Literal translation: To have tomatoes on one’s eyes.
Literal translation: I can only understand ‘train station.’.
Literal translation: You’re walking on my cookie.
Literal translation: The bear dances there.
Literal translation: Everything has an end. Only the sausage has two.But, I guess that’s always the case with idioms. Their literal translation/meaning is useless. Regardless, I find German ones particularly titular
As a German they are all technically correct, but one of them isn’t a proper translation.
I believe I spider.
“Ich glaube ich spinne.” isn’t in regards to spiders, the last word is a verb. “spinnen” means “to spin”, originally coming from spinning yarn, which then became spinning a thought :)
Veritasium did a bit Why it was almost impossible to Make the Blue LED
You even see them in Christmas lights. They’re so retina piercingly stark, like not a chill light at all (though obv on the “cool” end of the spectrum). I’m out here walking my dog looking at the nice twinkly warm lights - no one wants to see your damned pinprick holes into the Tron dimension
I often put a piece of duct tape on power indicator LEDs, some of them are incredibly bright to the point that it’s hard to read the display. The LED is generally still visible under the tape …
I have a fan with a special silent mode to be used at nighttime. Guess what: The LED indicating silent mode is on is bright enough to read by its light.
If I meet the person responsible for that decision I will put them to sleep.
I bet the person responsible for that is the type to use a night light.
Same here. I put two rings of jet-black electrical tape over the speakers I bought online because someone thought it was a great idea to blind me whenever I use the computer. There’s no way to turn them off when they’re plugged in. WHY??
At that point, you open the case and snip the leads going to the LEDs :D
Aww, I wish but my nephew loves the LEDs. He takes off the covers whenever he comes to play video games. 😅
Electrical tape gang here checking in. Less residue than duct tape – for the stupid bright LEDs you can still see them through the black tape even.
Try gaffer tape instead. It blocks all the light. It doesn’t reflect much light at all. It generally sticks to anything. You can get it in a variety of colors. It doesn’t leave as much sticky residue when removed or repositioned. I’ve not encountered many surfaces (expect painted surfaces) that it actually damages when carefully removed. I use black gaffer tape on basically all my electronic stuff: one strip to cover the whole light, two strips a razor’s edge width apart so that I can still see the indicator if I try but otherwise 99.9% of the light is blocked, or a strip with a folded over tab at one end for the displays I want to block %100 of the light %90 of the time.
Duct tape, duck tape, electrical tape, masking tape all really suck unless you love that sticky gunky residue they inevitably leave on everything. Gaffer tape isn’t perfect, but it’s much better for this kind of semi-temporary light blocking without too much surface damage kind of job.
TBH I have no idea which one of these the stuff I use qualifies as. It’s called “Panzertape” where I live, and the residue when you remove it doesn’t really seem to be in line with what you describe from duct tape (i.e. it’s very little).
This feels like one of those small innovations that will become a marker of quality once somebody thinks about them for a while. Someone will figure out how to make the perfect indicator visible in a dark-ish environment without emitting much light otherwise, or some other way to confirm something is charging and it’ll become the way you can tell which electronics are expensive. I, for one, can’t wait. My fiber box is wrapped in so much tape you could drop it from a tall building and it’d be just fine.
I wonder if just like a super small piece of like color e-ink display might work right.
Off it’s just white but on it becomes a red square. Doesn’t have to emit light but could add a gentle backlight but you can see it from pretty much any angle and it would be immediately identifiable.
Bonus points if it says something useful on that tiny piece – like a battery charge percentage or volume level.
Time to get roasted again but I dislike LEDs and I always tape black electrical tape on them.
I have an air purifier that is stupid bright, I tried painters tape but ended up using the aluminum foil tape to block the lights
I like my air purifier because there is a button on it specifically for dimming AND turning off the damn lights.
Two fer one. You also blocked its cloud features!
Why the fuck does my air purifier need to be cloud connected?
It wants to show you a graph of your air quality.
It wants to sell my air quality data. How often I fart, what the dispersion rate is, geolocation correlations for wildfire air quality monitoring, how often I replace filters.
Also just wants to leak your pii with the next inevitable breach.
This, but I use washi tape because it is less gunky.
My TV has a red LED that will blind you when the TV IS TURNED OFF
But how would you ever know the TV was turned off if it didn’t have a light to tell you?
I laughed at your reply, upvoted, and started to scroll when I remembered my TV has a “screen off” feature. I use it at bedtime to listen to futurama without the light making my sleep bad.
At some point the show stops playing and goes to a menu. You actually wouldn’t know the TV is on if it wasn’t for the light. 😑
To be fair to the tv, it’s not letting you know it’s off, it’s letting you know it’s still on but in sleep mode. TV’s are just giant tablets now. If it was off, you’d have to wait for it to boot into its operating system the next time you wanted to watch TV.
I have dumb TV’s still with the same problem. It’s to communicate that it’s plugged in and receiving power. If the TV isn’t working properly, that’s easy to verify rather than having to worry about the surge protector, outlet, circuit breaker, etc.
The fact that TV’s are “smart” is a whole other issue I could get curmudgeonly about.
It’s how you know that it’s waiting for your remote controller signals, right? Otherwise how would you know that the TV is waiting. Always waiting. So lonely. Please send it signals!
At least with my LG TV you can switch that off. It’s in general settings “Standby light” :)
Electrical tape is cheap
It also falls off too easily. My favorite for this use case is black Gorilla tape. Like duct tape but thicker.
Real Gs open the device and desolder the LED.
I use metallic permanent markers. They apply a nice, thick coating so that the light still works but is severely diminished. It also can be done to some devices without opening them if they don’t have the light recessed too far.
Bluetac - no light gets through and it’s usually pretty easy to remove when necessary.
Dry erase. Just dab it to adjust darkness levels.
Blue is meant to be calming and nice. The brightness probably needs lowered on these chargers.
Blue light makes you awake. They should use red.
Oh yeah, let’s just make the room comfortable for fucking demons and shit.
This is why you should THINK before typing.
You don’t want your room to look like it has a nice cozy fireplace?
red is more than demons and blood. a warm red light is often much more comfortable than blue
The comments show it’s not the color, but the intensity. Any color too bright is going to be annoying. I’ve got some monitors that have the perfect level for their power and controls, it’s just enough to be able to see in daylight, and not at all in the face in the dark. There’s no reason to have HID lights on electronic indicators (or on automobiles, but that’s a different topic).
It’s the very colour we’re not supposed to see at night though, if we want to sleep.
Sleep studies have found that even the standby light on a TV impacts sleep negatively.
Some electronic devices let you dim the status LEDs in the settings, e.g. for Fritz!Box routers.
Blue is percieved as brighter by the human eye at the same luminosity of other colors.
Also eyelids don’t block as much of it, so can still perceive blue lights with your eyes closed.
Also blue LEDs tend to be more efficient and higher luminosity…
I had a mine pickup that had a blue LED for the indicator that the buggy whip was on. That thing was a fucking laser at night, shining right into my eyeball. I eventually got fed up and made a duct tape flap to put right above it so I could still tell it was on (my feet would be blue) but my retinas would still be intact
Yeah, it’s way worse in vehicles haha. I have an aftermarket entertainment system in my 2006 Matrix – it has three modes: Daytime colours (bright), nighttime colours (dark blue but still bright), and screen off. Highway driving at night means the only real option is screen off. I otherwise really like the system, but it seems like a huge oversight. It seems that none of the developers of these things ever actually test them in nighttime driving/working conditions.
White painters tape on top of LEDs generally makes the light a bit smoother and, importantly, less bright.
I have done this to devices with poorly dispersed LEDs.
to be fair, on my WiFi router, a recent (cheap) TV my mother bought and my Xbox the LEDs are able to be disabled in software, so some manufacturers are catching on.
I don’t charge things at night since I don’t like to be asleep when a battery is charging. This conveniently makes it so I don’t get to see a charging light at night. Everything else is on a power strip with a switch. My bedside light and alarm clock are the only things plugged a power strip without a switch.
I once slept in a hotel room where the TV had a blue LED standby light. I had to go and cover it up, it was way too bright.
You guys in these comments should all buy light dimming stickers
We shouldn’t have to. Products should be made sensibly and of quality. They’ll skimp and save fractions of a penny on every single facet of a product’s design, so what possesses them to waste all this money on blinding lights that nobody asked for?
![‘NIGHTTIME BLUES’ [OC]](https://feddit.nl/pictrs/image/a4e9867e-4954-49a3-bf1f-e7b659dceca7.jpeg){kind=link}